Walker Exhaust Heavy Duty 36438 Exhaust Clamp - 3" Stainless Steel Clamp for Trucks & SUVs - Secure Exhaust System Repair for Off-Road & Towing

I have a Flow Master CAT Back exhaust on my 300C and the included exhaust tips had their own welded on clamps but due to the exhaust configuration, this made the tips stick out just a little bit farther than I wanted. So I cut them off along with about an inch of pipe on the tips and used these clamps. As always, these and the other 2" band clamps I've used are great because they clamp down very tight to secure the pipe / tips but do not crush the tips or pipe to make it almost impossible to later separate the pipes. These do slightly compress the pipes but I've already had to take them off and once the clamp is loosened, the pipes come apart with no issue. I highly recommend this product.Used this on my 2011 keep jku. Fit well and was very robustHad to cut exhaust clamp from my Jeep, this clamp was better than stock worked very well.greatNeeded clamps to seal some connections on my exhaust I replaced on my truck. I used all stainless steel for longevity and these stainless clamps worked well because of the clamping force and the sturdy bolts that did not strip or break with the force of air tools. Best bonus is that they can be removed and they do not crimp the exhaust tubing like traditional exhaust clamps. Shipping was fast and packaging was adequate.The clamp is made of stainless steel for a long life and clamps very efficiently. It can be loosened and retightened as many times as required without jamming, since it doesn't rust.Nice6 months on and the bolts are so rusty I almost broke one bolt trying to get it loose. The bands are fine and still shiny but the hardware is garbage.Used it to replace the clamp on the driver side post cat downpipe to crossover pipe on a 2008 F-150. Worked perfectly to replace the OEM clamp which had corroded. Had to cut off the OEM clamp and grind off the spot weld, after that it clamped down nice, no leaks.Very sturdy clamp, size 2.5inches, about 1 to 1.5 inches wide. Used it to fix a crack in my exhaust and, so far so good!A bit expensive for just a metal clamp but it is well constructed.Too small. Gotta return it. Have it two stars because it would of worked if it was the right sizegoodVery solid clamp